Chapter 4: Basic setup
38
TruVision PTZ 36X Camera User Manual
Sequence settings
The function executes pre-positioning of the pan, tilt, zoom, and focus features in a
certain sequence for a dome camera. Before setting this function, you must have set
up at least two preset points.
This function is located on Main Page 2.
Figure 17: Sequence menu
Table 12: Sequence menu description
Function Description
SEQUENCE LINE
Set up to eight sequences.
Using the left/right direction keys, select a sequence number and
then set its sequence steps.
SEQUENCE POINT
Set up to 64 points for each sequence. The sequence steps are the
order in which the preset points are carried out by the camera.
Preset position, speed, and dwell time will also influence how the
camera shows each sequence step.
PRESET POSITION Set a specific preset position to the selected sequence step. You
can specify one of up to 255 preprogrammed positions. The unit will
automatically make the step after the last programmed step, which
is an End step. The sequence will then loop and keep running.
SPEED
Set each sequence step to a different speed, ranging from 01 to 15.
Within this range, pan, and tilt speed varies from 5 to 400
(degrees/sec.)
DWELL TIME
Set the period of time that the camera will stay at a sequence step.
The range is from 0 to 127 seconds. The camera will move to the
next sequence step when the dwell time expires. If the setting is 0,
the dome will stay at this preset until the camera is manually
moved.
RUN SEQUENCE
Manually select which sequence to view after programming.
EXIT
Select Yes to save any changes and return to Main Page 2.
SEQUENCE
SEQUENCE LINE
1
SEQUENCE POINT
01
PRESET POSITION
001
SPEED
01
DWELL
TIME 001
RUN
SEQUENCE
ENTER
EXIT YES
Содержание TruVision PTZ 36X
