Interlogix TruVision DVR 15HD, Руководство пользователя

Страница: 17 / 175

Chapter 3: Getting started
TruVision DVR 15HD User Manual 13
The startup wizard
The recorder has an express installation wizard that lets you easily configure basic
recorder settings when first used. It configures all cameras to default settings. The
configuration of each camera and recorder can be customized as required.
By default the startup wizard will start once the recorder has loaded. It will walk you
through some of the more important settings of your recorder.
Any changes you make to a setup configuration page are saved when you exit the page
and return to the main wizard page.
Note: If you want to set up the recorder with default settings only, click Next in each
screen until the end.
To use the Startup wizard:
1. To launch the startup wizard without rebooting the device, go to Menu > Device
Management > General Settings and click ‘ Start wizard ’.
2. Select the preferred language for the system and resolution from the dropdown list
and then click Next .
3. Enable or disable the option to start the wizard automatically when the recorder is
turned on. Click Next .
4. In each setup configuration page, enter the desired information and then click Next
to move to the next page. The setup configuration pages are:
Wizard setup pages Description
User configuration You can change the admin password and create additional
users. You must enter an admin password.
The default admin password is 1234.
Caution : It is strongly recommended that you change the
password of the administrator. Do not leave 1234 as the
default password. Write it down in a safe place so that you
do not forget it. If you should forget the password to your
recorder, contact your supplier with the serial number of
your recorder to obtain a secure code to reset it.
Time and date configuration Select the desired time zone, date format, system time,
and system date.
If Daylight saving time (DST) is required, check Enable
DST and enter the desired summer and winter times.
Note : The system time and date are visible on screen.
However, they do not appear in recordings.
Network configuration Configure your network settings such as the NIC type, IP
address, subnet mask, and default gateway. Enter the
preferred DNS server address as well as the alternate one
to use.
HDD management The hard drives are initialized at the factory. However if
you wish to clear all data, click
Initialize to initialize the
HDD.