Interlogix NS4750-24S-4T-4X Скачать руководство пользователя страница 128

Страница: 128 / 429

128

ports. If the packet doesn't have an 802.1Q VLAN tag, the port will not alter the packet. Thus,

all packets received by and forwarded by an untagging port will have no 802.1Q VLAN

information. (Remember that the PVID is only used internally within the Switch). Untagging is

used to send packets from an 802.1Q-compliant network device to a non-compliant network

device.

Frame Income

Frame Leave

Income Frame is

tagged

Income Frame is

untagged

Leave port is tagged

Frame remains tagged

Tag is inserted

Leave port is untagged

Tag is removed

Frame remain untagged

Table 4-6-1:

Ingress / Egress Port with VLAN VID Tag / Untag Table

■

IEEE 802.1Q Tunneling (Q-in-Q)

IEEE 802.1Q Tunneling (QinQ) is designed for service providers carrying traffic for multiple customers across their networks.

QinQ tunneling is used to maintain customer-specific VLAN and Layer 2 protocol configurations even when different customers

use the same internal VLAN IDs. This is accomplished by inserting

Service Provider VLAN (SPVLAN)

tags into the customer’s

frames when they enter the service provider’s network, and then stripping the tags when the frames leave the network.

A service provider’s customers may have specific requirements for their internal VLAN IDs and number of VLANs supported.

VLAN ranges required by different customers in the same service-provider network might easily overlap, and traffic passing

through the infrastructure might be mixed. Assigning a unique range of VLAN IDs to each customer would restrict customer

configurations, require intensive processing of VLAN mapping tables, and could easily exceed the maximum VLAN limit of 4096.

The Managed Switch supports multiple VLAN tags and can therefore be used in MAN applications as a provider bridge,

aggregating traffic from numerous independent customer LANs into the

MAN (Metro Access Network)

space. One of the

purposes of the provider bridge is to recognize and use VLAN tags so that the VLANs in the MAN space can be used independent

Содержание NS4750-24S-4T-4X














































































































































































































































































































































































































































Результаты поиска

Содержание NS4750-24S-4T-4X

Отзывы:

Похожие инструкции для NS4750-24S-4T-4X

Бренды по названию

Популярные бренды

Interlogix NS4750-24S-4T-4X, Руководство пользователя

Результаты поиска

Содержание NS4750-24S-4T-4X

Отзывы:

Похожие инструкции для NS4750-24S-4T-4X

Бренды по названию

Популярные бренды