Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)#
erps 1 rpl owner port0
erps <1-64> sub
Command:
erps <1-64> sub port0 interface {10GigabitEthernet,
GigabitEthernet} <PORT0_ID> { { port0 interface
{10GigabitEthernet, GigabitEthernet} <PORT1_ID> },
{interconnect <major_ring_id: 1-64> [ virtual-channel ] } }
<1-64>
ERPS group number
interconnect
Sub ring is interconnected
<major_ring_id: 1-64>
Major ring group number
virtual-channel
Enable virtual channel for sub-ring
Default:
0
Usage Guide:
To create a profile and configure the
Sub ERPS interface port 0, port 1.
Example 1:
To create a profile 3 and configure the
Sub ERPS interface port
0(GigabitEthernet 1/5), port 1(GigabitEthernet 1/6)
without
interconnected
mode
and
Major RIng group
and
virtual-channel
Switch# configure terminal
Switch (config)#
erps 3 sub port0 interface GigabitEthernet 1/5
port1 interface GigabitEthernet 1/6
Example 2:
To create a profile 2 and configure the
Sub ERPS interface port
0(GigabitEthernet 1/3), port 1(GigabitEthernet 1/4)
with
interconnected mode
and
Major RIng group 1
and
virtual-channel
Switch# configure terminal
Switch (config)#
erps 1 sub port0 interface GigabitEthernet 1/3
interconnect 1 virtual-channel
erps <1-64> topology-change propagate
Command:
erps <1-64> topology-change propagate
<1-64>
ERPS group number
topology-change
Topology Change
propagate
Propagate
Default:
N/A
NS4702-24P-4X Managed Switch Command Guide
49
