Chapter 4: Commands for CLI configuration
Default:
0
Usage Guide:
To set
VOE
of
MEP
.
Example:
To set
VOE
(8)
of
MEP 1
Switch# configure terminal
Switch (config)#
mep 1 voe
monitor destination
Command:
monitor destination interface 10GigabitEthernet
<port_type_list> | GigabitEthernet <port_type_list>
monitor
Set monitor configuration
destination
The destination port. That is the port that trafficed should be
mirrored to
Default:
Disabled
Usage Guide:
To configure
Mirroring Port
Example:
To set
Mirroring Port
(
GigabitEthernet 1/2
)
Switch# configure terminal
Switch (config)#
monitor destination interface GigabitEthernet
1/2
monitor source
Command:
monitor source interface * | 10GigabitEthernet
<port_type_list> | GigabitEthernet <port_type_list> { both | rx
| tx }
monitor
Set monitor configuration
source
The source port(s). That is the ports to be mirrored to the destination
port.
Default:
Disabled
Usage Guide:
To configure
Mirrored Port
Example:
To set
Mirrored Port
(
GigabitEthernet 1/1, Tx + Rx
)
Switch# configure terminal
Switch (config)#
monitor source interface GigabitEthernet 1/1 both
NS3500-24T-4C Managed Switch Command Guide
183
