Interlogix Alliance system, Руководство пользователя

Страница: 39 / 76

Chapter 2
Alliance system menu
33
Disarm Camera Test Report. If all cameras tested successfully the display shows:
To display the disarm camera test report, do the following:
Table 16 lists the display options.
Arm test report
If you selected Arm Test, the display depends on the status of the zones.
If all zones tested successfully the display shows:
To display the arm test report, do the following:
1. Press ENTER ( Figure 1 ) to exit the menu.
2. If untested cameras are reported the display
shows the untested camera report
(
Figure 27 ).
Figure 27. Untested camera report
Table 16. Disarm test report options
Option Action
Display the complete zone name. Enter the zone number and press ENTER.
Update the zone list and display the next zone on the list (if any). Press ON/NEXT.
Exit this menu option. Press ENTER.
Exit the menu option and return to the original display. Press CLEAR.
1. Press ENTER ( Figure 1 ) to exit the menu.
2. If untested zones are reported, the displays
shows a list of untested zones either one at a
time (
Figure 28 ) or as a list of zone numbers
( Figure 29 ).
Figure 28. Arm test report one at a time
Figure 29. Arm test report list of zone numbers
All Cameras Tested Successfully
Press ENTER
Untested Camera 1
NEXT or ENTER
No Untested Zones
Press ENTER
Untested Arm On 17, Rear Door Contact
NEXT or ENTER
Untested Arm On 9, 14, 17
Zone No: