manualshive.com logo in svg

Intergraph RAX HD, Руководство пользователя

Поделиться
Скачать
Intergraph RAX HD Скачать руководство пользователя страница 27

19

Connecting the Base Unit to the Storage Arrays

To connect the system’s base unit to the Fibre Channel RAID storage arrays, route and connect
cables from the base unit to the Fibre Channel hubs, and from the hubs to the storage arrays.

Before you begin connecting the base unit to the storage arrays and hubs, note that:

♦

 

Each QLogic host bus adapter (HBA) connects to one hub.

♦

 

Each storage array connects to one hub.

♦

 

A 50-meter (164-foot) fiber optic cable connects the base unit to each rack-mounted hub.

♦

 

A 3-meter (9.8-foot) copper cable connects each rack-mounted storage array to its hub.

To connect the base unit to a storage array:

1.

 

Connect a fiber optic cable to one of the base unit’s QLogic
host bus adapter (HBA) cards.  The cable is keyed for
proper connection.

2.

 

Route the cable to a Fibre Channel hub.

3.

 

Connect the cable to a fiber optic GBIC port.  The
cable is keyed for proper connection.

Содержание RAX HD





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды