Intergraph InterServe 600 Series, Справочное руководство системы

Страница: 52 / 104

42
Changing the System Boot Sequence
To change the system boot sequence:
1. Restart the system.
2. Press
DELETE
when the following message displays:
Press DEL if you want to run Setup
The AMIBIOS Setup Main Menu displays.
3. In the Setup menu, click the Advanced icon. A list of parameters displays.
4. Click the System Boot Up Sequence parameter. The Options menu displays, with a choice of boot
sequences. The default is C:, A:, which designates the system hard disk drive (C:) as the initial
boot device, followed by the floppy disk drive (A:).
5. Click the A:, C: parameter to reverse the boot sequence; then press
ENTER
.
6. Select Exit and Save to exit AMIBIOS Setup.
7. Restart the system.
Until the boot sequence is changed back to C:, A:, the system will check for a bootable diskette in the
floppy disk drive before attempting to boot from the system’s boot disk drive.