Warning
: Please pay attention to the signal type of the sensor when connecting the sensor.
Connecting the sensor with the wrong signal type can damage the amplifier and the sensor.
The
Interface
USB drivers are required for the operation on a PC. They are available for download
on our website.
For operation of the SI-USB
4
we recommend the software VS3. It is available for download on our
website.
Among others, this software provides following functions:
•
Configuration possibilities for the VS3
•
Storage of sensor-related scaling and adjustment data
•
Display for the presentation of measured data
(actual value, tare value, minimum value and maximum value)
•
Presentation of the measured data in a diagram
•
Storage of measured data in CSV-format (output configurable)
•
Storage of the diagram in BMP-format (output size adjustable)
•
Print-out of the diagram with date and definable superscription
•
Presentation of the sensor information
3
.2 Safe and correct Use
Warning
: Observe the correct sensor adjustment.
Consider the correct VS3 configuration.
Choose a significant file identification/prefix when storing measured data.
Fasten housing, ground, connect power supply, protect from splash water and do not pull
the cable.
Interface Inc.
Page (5)
