1 Important Notes
Before installing and commissioning the device, these operating instructions, and in particular the
corresponding safety instructions, must be read. The device may only be used as described in this
manual to prevent injury or damage.
1.1 General Information
These operating instructions are intended for technically qualified personnel who have
appropriate
knowledge in the field of measurement and control
technology
. Qualified personnel are persons who
are familiar with the installation, operation, maintenance and repair of the device and have the appro-
priate qualifications. The personnel must have knowledge of the legal and safety regulations and be
able to apply them.
The device may only be used by qualified personnel in accordance with the technical data in
connection with the safety regulations and rules set out below. During operation, the legal and safety
regulations required for the respective application must also be observed. This also applies
analogously to the use of accessories.
The exact information about all safety instructions and warnings contained in these operating
instructions as well as their correct technical implementation are prerequisites for the safe
installation, commissioning, safe operation and maintenance of
Interface
devices. All measures must
only be carried out by qualified personnel. All persons involved in the project planning, installation
and operation of
Interface
devices must be familiar with the safety concepts
in automation
technology and be qualified in the above-mentioned sense.
For reasons of clarity, these operating instructions cannot cover all details and information
for
all
applications
or
conceivable types of installation, operation and maintenance
that
must be taken into
account.
If further information is desired or required
,
or if special problems occur which are not described in
detail in these operating instructions, please contact
Interface
.
Interface
devices
may only be operated in accordance with the applications described in these
operating instructions. Built-in devices may only be operated if they are properly installed.
By connecting and commissioning the device, the purchaser accepts the General Terms and
Conditions of Sale and Delivery of
Interface.
Furthermore, the buyer accepts the possible
incompleteness of this operating manual and that the information contained therein may not be
complete and information
is provided
without guarantee. Errors, misprints and changes excepted.
Interface Inc.
Page (1)
