What is Intended Use, What is not intended Use
A device from
Interface
is used for display, processing and control of processes. It must not be used
as the sole means of averting dangerous conditions on machines and systems.
Machines and
systems must be designed in such a way that faulty states cannot lead to a dangerous situation for
the operating personnel (e. g. through independent limit value-switches or mechanical interlocks).
In particular, it must be ensured that a the malfunction or failure
of the device
does not lead to
damage to property or loss that c
ould en
danger people. It is also important to
ensure that safety
precautions
are not being
circumvented for the safety of a plant. Emergen
cy stop devices must
remain effective at all times.
Installation Instructions
Devices from
Interface
must be installed and connected in compliance with the relevant DIN and
VDE standards. They must be installed in such a way that unintentional operation
is sufficiently
excluded.
T
o prevent an interruption of the supply and signal lines from leading to an
undefined
or
dangerous state, appropriate hardware and software safety precautions must be
ob
served. Supply
and signal lines must be installed in such a way that they do not interfere with the function of the
Interface device (such as inductive or capacitive interferences).
Notes on Malfunctions, Maintenance and Repair
The device do
es
not contain any parts that
can be serviced by the user. Repairs may only be
carried out by
Interface
. If it can be assumed that safe operation of the device is no longer possible,
it must be put out of operation immediately and secured against unintentional operation. This
applies in particular if:
•
The device is visibly damaged
•
The device is no longer functional
•
Parts of the appliance are loose
•
The connecting lines are visibly damaged
In addition, we would like to point out that all obligations of
Interface
arise exclusively from the
respective purchase contract in which the warranty is conclusively stated.
1
.2 Intended Use
Devices from
Interface
are to be used exclusively for measuring tasks and the directly associated
control tasks. Any use beyond this is considered to be improper.
Legal and safety regulations must
be observed during measurement. The instrument is not a safety component in the sense of its
intended use and must be transported and stored properly. Installation and commissioning, as well
as operation and disassembly must be carried out professionally.
Interface Inc.
Page (2)
