1
.3 General Hazards in the Event of non-compliance with the Safety
Instructions
The device
is in compliance
with current safety requirements. Residual dangers can emanate from
the device if it is improperly used and operated by untrained personnel. Any person entrusted with
the
installation, operation, maintenance and repair of the device must read and understand the
operating instructions and, in particular, the safety instructions.
Incorrect use (e. g. by untrained personnel) may result in residual hazards. The operating instructions
must be read and understood by all persons involved in the installation, commissioning, maintenance,
repair, operation and dismantling of the device. The device must not be used if da
mage is visible.
1
.4 Residual Hazards
The system planner, equipment supplier and operator must plan, implement and be responsible for
the safety of the equipment. Other hazards must be minimized. The residual dangers of
measurement technology must be pointed out and human error must be taken into account. The
design of the
system must be suitable for avoiding hazards - a hazard analysis must be carried out
for the system.
2
Safety and Warning Notices
2
.1 Symbols
Warning
: There is a risk of injury to persons. Damage to the machine is possible. The
accident prevention regulations of the employer‘s liability insurance association must
be observed.
Note
: Important points to be observed. A note that indicates a possible danger of da-
mage to the product, process, person or the environment.
Additional information or reference to other important detailed information.
Interface Inc.
Page (3)
