Hardware Installation — 9
5. The green join LED of the receiving switch and ECP-Transmitters will blink regularly if both devices are already
joined with same network password.
[Note]
All ECP/EUP products have the same network password as factory default mode to support plug & play
configuration between ECP/EUP Series.
6. If the green Join LED is OFF on both receiving switch and ECP-Transmitter, joining work should be necessary
for network communication.
[Note]
For joining work, Please refer to the Network Grouping Software manual, available on Intercoax' Website.
7. Connect ECP-Transmitters to IP Camera
(IP it is PoE IP Camera, Please select PoE Switch ‘ON’ from ECP Transmitters)
8. Connect the receiving switch to Network switch and PC using RJ45 Patch cord.
