3
Precaution and Safety Guidelines
• Please install the device following the installation guide.
• Reed all warnings.
•
Warning:
Do not touch the device and cable with wet hands.
•
Warning:
Clean this apparatus only with a dry cloth.
•
Warning:
Please do not put the products on anything electrical conductive (screwdrivers, coins, iron, etc.)
and not put them around water.
•
Warning:
Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus that produce heat.
•
Warning:
Do not use for other purposes.
•
Warning:
Do not put the signal lines (Coax, UTP) in the same conduit as high voltage wiring
• Do not put any sticker or paint on it.
• Indoor use only.
•
Please use only attachments or accessories specified by the manufacturer.
• Unplug the device during a lightning storm or when the device is not used for a long time.
(i.e. Connecting analog camera to BNC connector)
• Do not connect analog cameras to BNC connectors (B-Linx Port) on this devices (ECP Series only)
• Do not connect any IP devices to RJ45 connectors (T-Linx Port) on this devices (EUP Series only)
• When the unit is not working properly, please contact dealer or customer service.
• Please do not disassemble the unit by yourself.
•
If this device emits smoke, abnormal noise, or a strange odor, please turn off
the power switch, unplug the AC power cord immediately, and contact dealer or customer service.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
