Hardware Installation — 16
4.
Repeat above
① ~ ③
steps for the other groups (B, C, D)
[Caution]
This method will join the devices by assigning a random password and it can not be restored to the factory
default password.
[Note]
Joining can also be made with the management software, INTERCOAX ECP MANAGER but before
joining with software, the ECP-28XXRM series and ECP-Transmitters should already be joined together
with the same network group password.
[Note]
Password on ECP/EUP-Transmitters can be also easily changed by Intercoax Manager software.
Please visit www.intercoax.com to download the software.
2.4.4.
Label the configured network group
•
After joining with the join button,
it is highly recommended to put the label on the devices joined in same
network group and keep the documentation of Group ID and MAC address of the devices in each group.
•
After joining with the software,
it is highly recommended to put the label on the devices joined in same group
and password of the group and keep the documentation of Group ID and MAC address of the devices in each
group.
• This documentation helps to identify each network group after deployment and when maintaining devices.
