OPERATION AND ASSEMBLY
39
E
ng
lis
h
Adjust the inclination of the seat shell by pulling the push bar up or press-
ing it down while pulling on the gas-pressure spring release lever�
Let go of the release lever to lock the seat shell into the adjusted inclina-
tion angle�
Deactivate the parking brake, as appropriate
Important:
Never pull the release lever without a firm grip on the push bar if a
patient is seated in the wheelchair�
7
.
3
Adjustment options for the push bar
The push bar has various adjustment options� This makes it possible to achieve
optimal customization to the person being pushed� The following adjustment
options are possible:
7
.
3
.
1
Adjusting the angle of the top
piece of the push bar (with
incremental adjustment only)
In order to adjust the angle of the
push bar (Fig�
13
), proceed as follows:
Activate the parking brakes
Loosen the screw connec-
tions on the right and left
ratchet joints on the push bar
(
1
) by turning the clamp levers
counter-clockwise until the
top piece of the push bar becomes loose�
Move the push bar into the desired angle (
2
)�
Hold the push bar in the desired position with one hand and secure it in
place by tightening the corresponding clamp lever with the other hand�
Secure the screw connection on the other side as well by tightening the
clamp lever�
When tightening the ratchet joints make sure that the teeth are engaging
properly�
Deactivate the parking brake, as appropriate
7
.
3
.
2
Adjusting the height of the push bar unit
The height of the push bar always needs to be adjusted when it is necessary to
customize the MINY to the person being pushed or if the inclination of the seat
shell has been changed�
13
1
2
