Interacoustics Eclipse ABRIS, Инструкция по эксплуатации

Страница: 146 / 149

11.8.2 EP15/EP25/VEMP module stimulus maximum intensity
From software 4.5 the stimulus maximal is increased for all transducers.
Insert earphones and headphone can now go even louder.
To get the increased intensity maximal for bone conductor. Firstly get the B81 BC, secondly ensure that the
correct bone vibrator is chosen in the calibration setup, to allow more output for the bone vibrator.
If it is a new transducer, always ensure that it is calibrated prior to use, follow the procedure as described in
the service manual.
The below table is an overview of what the various transducers can minimum perform of intensity from
software 4.5.
Individual systems may be able to perform even louder as this depends on the individual transducer
sensitivity per frequency.
ABR3A DD45 TDH39 B71 B81
Stimulus
short 2-1-
2 Long
short 2-
1-2 Long
short 2-1-
2 Long short 2-1-2 Long short 2-1-2 Long
Burst 250 105 115 105 110 105 110 50 50 50 55
Burst 500 110 120 115 120 115 120 50 50 70 80
Burst 750 110 120 120 120 120 120 50 50 70 85
Burst 1000 110 120 120 120 120 120 50 50 75 90
Burst 1500 110 120 115 120 115 120 50 50 80 95
Burst 2000 110 120 115 120 110 120 50 50 75 90
Burst 3000 110 120 120 120 115 120 50 50 65 85
Burst 4000 105 120 115 120 110 120 50 50 65 80
Burst 6000 90 110 100 120 100 120 45 50 45 65
Burst 8000 70 95 95 120 90 115 35 50 35 60
CE-Chirp 100 105 110 110 110 110 40 50 70 70
Click 100 100 105 105 105 105 50 50 70 70
Click 200Hz-10kHz 95 95 105 105 105 105 50 50 70 70
NB CE-Chirp 500 105 105 115 115 115 115 50 50 60 60
NB CE-Chirp 1000 110 110 115 115 120 120 50 50 70 70
NB CE-Chirp 2000 105 105 115 115 110 110 50 50 70 70
NB CE-Chirp 4000 105 105 115 115 110 110 50 50 60 60