15
SC-9216R
SPEAKER LINE CHECKER
11. 1 of 4 Single Check
SINGLE CHECK will manually cause a test to occur, only on the channel indicated on the display, without
waiting for the next scheduled automatic test. Channel selection is performed by depressing the Up and Down
cursor buttons on the front of the SC-9216R, then depressing ENTER. One of the four system configurations
(5-1, 5-2, 5-3, 5-4) must be selected though in most applications it does not matter which one is used. The
selection process is described in the Advanced Operation section of this manual. Selecting 5-1 is generally
suitable.
[10-3]
[10-4]
To test
ALL CHANNELS
press ENTER.
(Spk Z x 70V)
To test
ALL CHANNELS
press ENTER.
(Spk Z x 100V)
[11-1]
[11-2]
To test
CHANNEL XX
press ENTER.
(Spk W x 70V)
To test
CHANNEL XX
press ENTER.
(Spk W x 100V)
[11-3]
[11-4]
To test
CHANNEL XX
press ENTER.
(Spk Z x 70V)
To test
CHANNEL XX
press ENTER.
(Spk Z x 100V)
