Inter-m DSA-2000Q, Руководство по эксплуатации

Страница: 23 / 36

ProfessIonAl PoWer AMPlIfIer
21
DsA-500Q/2000Q
In loCK PAnel, you can loCK or UnloCK the functions controlled from the front of the device.
If you set the device to loCK, the system will redirect you to the initial oleD screen, and you will not be able
to use the buttons at the front of the device. To UnloCK the device, press down the seleCT/enTer
(enCoDer) dial at the front, then type the loCK/UnloCK password. The initial password is 0000.
6. 3 DEVICE NAME
DeVICe nAMe displays the name of the device. You can change the DeVICe nAMe from the PC program.
Please refer to the PC program manual for detailed instructions. You can download the PC program manual
from our company’s official website (www.inter-m.net).
6. 4 FACTORY RESET
In fACTorY reseT, you can initialize the device to its factory settings.
If you press CAnCel or the esC button at the front of the device, you will be redirected to the previous
screen.
6. 5 VERSION
In VersIon, you can check the firmware version, DAnTe neTWorK version of the current device.
The screen will display the firmware version of the device at all times. However, it will display the DAnTe
neTWorK version only when DAnTe is connected to the device.
[ DEVICE NAME ]
DSA-SERIES
[ FACTORY RESET ]
> CANCLE
FACTORY RESET
[ DEVICE VERSION ]
0.1.0.4
[ DANTE VERSION ]
DISCONNECT