Inter-m DSA-2000Q, Руководство по эксплуатации

Страница: 8 / 36

ProfessIonAl PoWer AMPlIfIer
6
DsA-500Q/2000Q
Rear Panel
Rear Panel
1. AC INPUT TERMINAL
Terminal that connects the power cord that comes with the device. The power source is AC 220-240V,
50/60Hz.
※
for DsA-500Q, the fAn will begin operating quickly when the AC Powercon that comes with the device
is removed or the power supply is shut down. This is to lower the heat generated during the device’s
operation and discharge it to make the product set safe. If you want to move the set, please disconnect
the AC Powercon or remove the power supplier, then wait until the fAn stops operating.
2. AIR VENTS
Air circulation vents to prevent the device from overheating. Please be careful not to block the front/back of
the vents.
3. DANTE DIGITAL AUDIO PORT
A PorT that facilitates the audio transmission through the Dante network made by Audinate. You can use
this PorT and network cables to receive and play audio.
4. ETHERNET PORT
A PorT that connects to eTHerneT through an rJ-45 jack. When selecting a cable, please choose a DIreCT
cable. Please refer to the PC program manual for instructions on the PC program. You can download the PC
program manual from our company’s official website (www.inter-m.net). A network connector (rJ-45) that
supports 100/1G Base-t.
CH
CH
CH
CH
8
300
4
500
2
800
8
1000
4
1600
AC INPUT
2 1 3 4
6 5
<100 Base-T>
<1G Base-T>
PIN NO Function PIN NO Function
1 TXN 1 MX(0)+
2 TXP 2 MX(0)-
3 RXN 3 MX(1)+
4 NA 4 MX(1)-
5 NA 5 MX(2)+
6 RXP 6 MX(2)-
7 NA 7 MX(3)+
8 NA 8 MX(3)-