I N S T A L L A T I O N M A N U A L
X - S T R E A M 2 ™ S L I D E
8
XS2-IM Rev. 10/14 (SBK-XS2 INSTALL)
LIST OF REQUIRED TOOLS
Tools required for assembly and installation of X-Stream 2 slide:
NOTE: USE PROVIDED ANTI-SEIZE ON ALL BOLTS!
1. Hammer
2. 3/8" drive ratchet
3. 3/8" x 6" ratchet extension
4. 1/2" deep socket (deep socket is necessary)
5. 9/16" socket
6. 9/16" box end ratchet wrench
7. Drill with 3/8" masonry bit
8. Tape measure
9. PVC Pipe Cutter
ASSEMBLY AND INSTALLATION INSTRUCTIONS
For left turn slides, flume A–B is the upper flume and C–D is the lower flume, in that order.
For right turn slides, flume C–D is the upper flume and A–B is the lower.
Fig. 1
Note: Use slide box and packaging during assembly to protect slide components from
damage from the decking surface.
