I N S T A L L A T I O N I N S T R U C T I O N S B Y O S 1 S L I D E
9
BYOS-IM Rev. 08/15 (SBK-BYOS INSTAL)
Fig. 9
Fig. 10
Fig. 11
Fig. 12
STEP THREE: Entry section anchor assembly - CONTINUED
The BYOS ESA COMBO must have a minimum concrete embedment depth as shown in Fig. 9.
The maximum gap between bottom on BYOS entry section and concrete is 12”. Anchor may
be mounted in ground or with minimum 18” diameter tube.
When oriented correctly, the bottom of the entry section will be level as shown in Fig. 10.
When attaching the first BYOS section to the Entry Section, the anchor right and left arms
will be attached as shown in Fig. 11 and 12.
NOTE: When slide is assembled and leveled as per instructions, the bolts on the
anchors may be tightened.
TIP: Once all the flume sections are assembled and the flange bolts are correctly tightened,
do a water test with a garden hose to ensure there are no flume to flume leaks.
