intensity BlackSeries DIVERSE MDV-V28W/DHN1(At) Скачать руководство пользователя страница 4

3

Keep indoor unit, outdoor unit, power supply wiring and 

transmission wiring at least 1 meter away from televisions 

and radios. This is to prevent image interference and 

noise in those electrical appliances. (Noise may be 

generated depending on the conditions under which the 

electric wave is generated, even if 1 meter is kept.) 

3.    OUTDOOR UNIT INSTALLATION

3.1   Installation place

CAUTION

There is combustible gas leakage.
There  is  much  oil  (including engine oil) ingredient. 

Please  keep  away  from  the  following place, or malfunction of the 

machine may be caused: 

There  is  salty  air  surrounding (near the coast). 
There is caustic gas (the sulfide, for example) existing in the 

air (near a hotspring).
A place the heat air expelled out from the outdoor unit can 

reach your neighbor’s window.
A  place  that  the  noise  interferes your neighbor´s every day 

life. 
A  place  that  is  too  weak  to  bear  the weight of the unit. 
Uneven place.
Insufficient ventilation place.
Near  a  private  power   station  or  high Frequency equipment. 

The insulation  of  the metal parts of the building and the air 

conditioner should comply with the regulation of National Electric 

Standard. 

Install indoor unit, outdoor unit, power cord and connecting 

wire at least 1m away from TV set or radio to prevent noise or 

picture interference.

Install the unit in the place that can offer enough space for 

installation and maintenance.Don’t install it in the place that 

has a high requirement for noise,such as the bed room.

Fig.2-2

Fig.3-1

Fig.3-2

Fig.3-4

      Supposing the wind direction during the operation season of the

 discharge port is set at right angle to the wind direction.

  Installation in the following places may result in some troubles. 

  Do not install the unit in such places below.

         A place full of machine oil.

         A place full of sulphuric gas.

         A place where high-frequency radio waves are likely to be 

         generated as from audio equipment, welders, and medical 

         equipment.

3.2   Installation space (Unit:mm)

F

E

H

D

C

D

C

H

F

E

G

B

A

28

kBtu/h

Fig.3-3

36/42

kBtu/h

A

G

 

Strong

wind

Strong

wind

Содержание BlackSeries DIVERSE MDV-V28W/DHN1(At)















Отзывы: