60
NAS setting
1. Select<Storage management>tab.
2. Click<NAS Setup>.
3. Enter the information registered in your NAS.
IP Address
：
Unique IP address assigned to the NAS.
ID
：
An ID registered in the NAS.
Password: Password registered in the NAS.
Saving list: The NAS user file to save data.
4. When done, turn “off” to “on” of NAS Setup, then click [yes].
5.
Refreshing after a wile, when it display the capacity of NAS, means the device have
connected with NAS server.
It will display “Recording”, when the device is recording the data.
If the fail message is displayed, check the following
：
- Confirm that the IP address of the NAS is valid.
