59
It will display “Recording” when the device is recording data.
It will display “Ready” if turn “enable” to ”off”.
If display “ERROR”, please check below items:
- Check memorizer, make sure it connects with device.
- Check the file in the memorizer, make sure it didn’t damaged.
- Check memorizer, make sure it didn’t been broken.
If it still display “ERROR”, please change Micro SD card.
4. Check<Hard drive capacity> and <Usable size> of micro SD card.
5.
Check the saved data, if they are not important, click <formatting>
The formatting will slow if the micro SD card is large capacity.
The data stream will increase if you set high resolution, high rate and high frame
rate.
6. Select “yes” of “Auto Overrides”, if micro SD card is full, it will delete old date and save new
date to replace.
Once you delete the data, you cannot recover it.
7. Hard disk full alarm: when Micro SD card is full, it will alarm and record the log.
8
．
Hard disk full threshold value: when [available capacity/total capacity = threshold value],
the device will think of micro SD card is full.
9. When done, click [yes].
