background image

9

DRIVER INSTALLATION

5.  When the Ready to Install the Program screen displays, click “Install.” If another  

  Found New Hardware screen displays instead, wait a moment for the program  

  to update, then continue. After you click “Install,” wait for the program to run.

6.  When the final utility screen displays, click “Finish” to complete the driver  

  installation process. 

 

 

9

DRIVER INSTALLATION

5.  When the Ready to Install the Program screen displays, click “Install.” If another 

  Found New Hardware screen displays instead, wait a moment for the program 

  to update, then continue. After you click “Install,” wait for the program to run.

6.  When the fi nal utility screen displays, click “Finish” to complete the driver 

  installation process.

 INTELLINET

 INTELLINET

 INTELLINET

 INTELLINET

 the INTELLINET WLAN Utility. Click Finish

to exit the wizard.

9

DRIVER INSTALLATION

5.  When the Ready to Install the Program screen displays, click “Install.” If another 

  Found New Hardware screen displays instead, wait a moment for the program 

  to update, then continue. After you click “Install,” wait for the program to run.

6.  When the fi nal utility screen displays, click “Finish” to complete the driver 

  installation process.

 INTELLINET

 INTELLINET

 INTELLINET

 INTELLINET

 the INTELLINET WLAN Utility. Click Finish

to exit the wizard.

Содержание 524810















































Отзывы: