Intellinet 522748, Руководство пользователя, Страница: 25 / 43

802.11g Wireless PCI Card
25
In the
Wireless Network Properties screen you may change Wireless network name . You may
also enter wireless network encryption keys by checking Network Authentication (Shared mode)
or Data encryption (WEP enabled) . You may enter up to four keys of length 10 or 25
hexadecimal digits. You may also set one of the four keys as a default key.
Click on
IP Config to set the IP address, Subnet mask, and Default gateway manually instead of
obtaining the IP address automatically through the Dynamic Configuration Host Protocol (DCHP)
server. You may also set the DNS server address settings and WINS address settings.
If the network you are using is a computer-to-computer network or ad hoc network, no access
points are used. You may check the box “This is a computer to computer (ad-hoc) network; no
access points are used” to enable this option.
On the
Configuration Tab click on Refresh to call up all the available WLANs. On the right side
of the screen is a list of Preferred WLANs. These are WLANs that have already been added to
the wireless network. Click New to rename the WLAN and reset its properties. You will see the
Wireless Network Properties screen as displayed previously when you click New . This is also
the same screen that will appear when you click Properties on the right side of the Configuration
Tab screen. Click Remove to remove the connection.
On the right side of the screen you may click
Move Up to move the selected WLAN up in the order
it is displayed on the Preferred WLANs screen. You may click Move Down to move the selected
WLAN down in the order in which it is displayed.