802.11g Wireless PCI Card
11
3. An Ad-Hoc Network
If you have two or more computers (desktops or laptops) and want to share files and printers, but
no Internet connection, please complete the following instructions. When your Ad Hoc network is
complete it may look similar to this:
(Requirements: Wireless network cards -for example, the
IEEE 802.11g Carbus Wireless Network
Adapter
.)
To complete this installation, please follow these steps:
1. Install
The
802.11g Intellinet Wireless PCI Card
into your desktop computers.
2. Set
the
Static IP Address
of the
wireless cards
.
Note: The IP Address for all computers must be in the same IP Address range, and the Subnet Mask must be the
same for all computers on your network. For example: If the first computer is assigned an IP Address of
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second computer can be assigned an IP Address
of 192.168.0.x (where x is a number between 3 and 254) with a Subnet Mask of 255.255.255.0, etc.
3. Check
the
Device Manager
to confirm that the
wireless card
is installed correctly.
4. Check
the
Wireless Configuration
for each
wireless card
.
Содержание 522748
