manualshive.com logo in svg

Intellijel CYLONYX Rainmaker, Руководство пользователя, Страница: 18 / 19

Поделиться
Скачать
Intellijel CYLONYX Rainmaker Скачать руководство пользователя страница 18

34

sPeCifiCATiONs

Dimensions

height

3U eurorack standard height 

width

36 HP 

Depth

44 mm/ 1.75 in  (from rear of front panel to top of fpga board power connector)

Power Consumption

+12V

270 mA.

-12V

24 mA.

+5V

0 (not connected)

Voltage levels

iNL, iNR, 
OUTL, OUTR

- 5 to +5 Volts

CLK (in and out)

0 to +5 volts

Cv inputs

0 to +10 volts

CHANGe LOG

Version 1.09:

ADDED: Mod B Only Destination for Rhythm Delay Time (with range set by CLK DIV - repeats 

every 4 levels of CLK DIV) (Mod A can still be set to Delay Clock Div)

ADDED: Reduce MOD LEVEL amplitude by a factor of 8 when the encoder is pressed while the 

mod pages are displayed. This is to give more subtle modulations.

CHANGE: The preset load/save changed so that now the last preset to be saved or loaded is 

loaded on power up

FIXED: Routing was not loaded all the time from preset

FIXED: Preset Loading Screen flashes to boot screen and hangs

FIXED: Randomizer on some list based values was giving out of range values

Version 1.05:

ADDED: an additional mode, called “Random”, has been added to the RANDOMIZE function. 

This selects a randomize mode at random from the other 15 modes.

ADDED:  an entry labelled  

DLY CLK/T 

has been added to the comb CLK SRC list.

ADDED: five new values have been added to the list of MOD A/B destinations.

ADDED: Automatic Gain Control (AGC) circuits have been added to the rhythm delay feedback, 

comb feedback, and overall output pathways. This prevents runaway feedback and the result

-

ing distortion. 

CHANGED: by popular demand the word “PILE”, present on the original front panel design, has 

been replaced by the word “STACK”. The functionality has not been changed.

CHANGED: now when you hold down the LOAD button when pressing the rotary encoder while 

loading a preset, just the parameters of the active effects (as stored in the preset) will be load

-

ed. This was the default behaviour before, now the default behaviour is to load all parameters.

IMPROVED: The interpolation used in the rhythm delay and comb modulation LFOs has been 

improved, reducing clicks and artifacts when modulating the delay lines.

CORRECTION: the value 671 msec has been added to the list of GRAIN SIZE values. This was left 

out in the previous version of the manual.

Содержание CYLONYX Rainmaker




















Отзывы:

Нет отзывов