20
4.
After having selected the desired weight unit, press the
MENU
button to go to
next parameter or CAL button to return to previous.
5.
To escape from parameters setup menu, press the
MENU
button until the
acoustic alarm is over, then release the button. The balance returns to normal
weighing conditions.
*
The unit of measure with the star (*) are not available in the balances with the software
for paper grammage. In these models is possible to set from the menu of the units of
measure the multiply factor of the weight “M 10” or “M 100”. For visualizing the m²
weight, select the M 100 multiply factor (as described at pag. 17) and load on the pan a
10x10 cm piece of paper.
1 0 x 1 0 c m p a p e r s a m p l e