Intelligent Motion Systems MDrive34AC & 42AC Plus MDrive34AC Скачать руководство пользователя | Manualshive

Страница: 70 / 81

background image

A-17

Appendices

Appendix C

Optional Cables and Cordsets

MD-CC300-000: USB to SPI Parameter Setup Cable

The MD-CC300-000 USB to SPI Parameter Setup Cable with adapter MD-ADP-M23 provides a communication
connection between the 19-pin M23 connector on the
MDriveAC Plus Microstepping and the USB port on a
PC.

IMS SPI Interface Software communicates to the
Parameter Setup Cable through the PC's USB port.

The Parameter Setup Cable interprets SPI commands and
sends these commands to the MDrive through the SPI
interface.

Supplied Components: MD-CC300-000 Parameter
Setup Cable, USB Cable, USB Drivers, IMS SPI Interface
Software.

Installation Procedure for the MX-CC300-000

These Installation procedures are written for Microsoft Windows XP Service Pack 2. Users with earlier versions of
Windows please see the alternate installation instructions at the IMS web site (http://www.imshome.com).

The installation of the MD-CC300-000 requires the installation of two sets of drivers:



Drivers for the IMS USB to SPI Converter Hardware.



Drivers for the Virtual Communications Port (VCP) used to communicate to your IMS Product.

Therefore the Hardware Update wizard will run twice during the installation process.

The full installation procedure will be a two-part process: Installing the Cable/VCP drivers and Determining the
Virtual COM Port used.

Installing the Cable/VCP Drivers

1) Plug the USB Converter Cable into the USB port

of the MD-CC300-000.

2) Plug the other end of the USB cable into an open

USB port on your PC.

3) Your PC will recognize the new hardware and open

the Hardware Update dialog.

4) Select “No, not this time” on the radio buttons in

answer to the query “Can Windows Connect to
Windows Update to search for software?” Click
“Next” (Figure C.3).

Figure C.1: MD-CC300-000

WARNING! DO

NOT connect or

disconnect the MD-

CC300-000 Communications

Converter Cable from MDrive

while power is applied!

NOTE: All three

components,

the MD-CC300-

000, MD-ADP-M23 and

MD-CS10x-000, or their

equivalent are required for

prototyping.

10 Pin Connector

Cable Length 6.0 ft (1.8 m)

MD-CC300-000

USB to SPI Parameter Setup Cable

www.imshome.com

USB Cable

Length 6.0 ft (1.8 m)

1.0 in

(25.0 mm)

3.75 in

(95.0 mm)

0.875 in

(22.0 mm)

USB

To MDrivePlus Microstepping

To PC USB

Figure C.2: MD-CC300-000 Mechanical Specifications

Figure C.3: Hardware Update Wizard

«
...
68
69
70
71
72
...
»

Содержание MDrive34AC & 42AC Plus MDrive34AC


















































































Отзывы:

Нет отзывов

Похожие инструкции для MDrive34AC & 42AC Plus MDrive34AC

All in One Printer

Бренд: Baracoda Страницы: 42

Бренд: 3Com Страницы: 8

Бренд: LaCie Страницы: 4

Бренд: LaCie Страницы: 4

Бренд: Opengear Страницы: 2

PARTNER Voice Messaging PC Card Release 2

Бренд: Lucent Technologies Страницы: 67

Бренд: Klark Teknik Страницы: 50

Бренд: Telex Communications Страницы: 28

IntroSpect Analyzer 2 Series

Бренд: Aruba Страницы: 5

Бренд: Altera Страницы: 42

Бренд: Hama Страницы: 6

Бренд: Galaxy Страницы: 30

Бренд: H3C Страницы: 9

Бренд: B&B Electronics Страницы: 17

Бренд: Active Communications Страницы: 10

Бренд: ATI Technologies Страницы: 87

Бренд: ETAS Страницы: 36

Бренд: LevelOne Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды