ILC LightLEEDer Operation Manual
Version 1C 3/14/17
Appendix B
Timer Control:
1. From the home screen, press
eDIT
(Networked Panels
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. Press
2 times to scroll down
3. Press
OTheR DeVICes
4. Press
MOTOR OUTPUTs (motor output screen)
5. Press
OUTPUT then
or
to select the device channel (1-4)
6. Press
COnFIgURe (control screen)
7. Press
TYPe until “TIMeR” appears
8. Press
sOURCe
9. Press
or
to select the timer to activate the action.
10. Press
BACK
11. Press
ACTIOn then Press
ACTIOn until the desired
action appears (see table 3.8)
12. Press
RUn TIMe then
or
to adjust the “On” time
required
13. Press hOMe to exit
Preset Control:
1. From the home screen, press
eDIT
(Networked Panels
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. Press
2 times to scroll down
3. Press
OTheR DeVICes
4. Press
MOTOR OUTPUTs (motor output screen)
5. Press
OUTPUT then
or
to select the device channel (1-4)
6. Press
COnFIgURe (control screen)
7. Press
TYPe until “PReseT” appears
8. Press
sOURCe
9. Press
or
to select the preset to activate the action.
10. Press
BACK
11. Press
ACTIOn then Press
ACTIOn until the desired ac-
tion appears (see table 3.13)
12. Press
RUn TIMe then
or
to adjust the “On” time
required
13. Press hOMe to exit
Table 3.13: Available Programming Actions
Stop:
Upon input contact the the motor output will open or stop.
Run Positive:
When contact is made on the input the motor output
will go positive with an adjustable output of .1 second to 10 seconds
in .1 second increments, 10 to 300 second increments, or latched.
Run Negative:
When contact is made on the input the motor output
will go negative with an adjustable output of .1 second to 10 seconds
in .1 second increments, 10 to 300 second increments, or latched.
DEVICE 01
ACTIVE: YES
OUTPUT: M:01.01.1
CONFIGURE (COM)
CONTROL 01
TYPE:TIMER
SOURCE
ACTION
Motor Controller Timer Control
From the MOTOR OUTPUTs screen, press
COnFIgURe, then TYPe
CONTROL 01
TIMER: TIMER.001
Press
sOURCe then BACK
CONTROL 01
ACTION: RUN-POS
RUN TIME=000.1
Press
ACTIOn then RUn TIMe
DEVICE 01
ACTIVE: YES
OUTPUT: M:01.01.1
CONFIGURE (COM)
CONTROL 01
TYPE:PRESET
SOURCE
ACTION
OUT1:OFF
Motor Controller Preset Control
From the MOTOR OUTPUTs screen, press
COnFIgURe, then TYPe
CONTROL 01
PRESET: PRESET.001
Press
sOURCe then BACK
CONTROL 01
ACTION: RUN-POS
RUN TIME=000.1
Press
ACTIOn then RUn TIMe
