Intelligent Appliance IA-3121-E, Руководство пользователя

Страница: 22 / 25

IA-3121-E
22
www.intelligent-appliance.com Specifications are subject to change without notice
32-ch Solid-State Relay (SSR) Board,
Ethernet IP Controlled
IA Series-3000 Daisy-Chain
!aaEdddddddd – Set initial state
Description This command defines relays state at POWER-UP
Syntax !aaEdddddddd <CR>
!
Delimiter character
aa Hexadecimal address of the device
E System control command
d Relay output activation command data for each nibble in hex format
<CR> Carriage Return - End of command
Response |Edddddddd<CR> if the command was valid
Example Command: !
00E10001000
<CR>
Response: |
E10001000
<CR>
This command will define the initiate state of relays #13 and #29 as
“No Active”.
Default state is !00E00000000 (All relays are OFF at power up)
Note
!