13
INS-500 & INS-1000 • 5403645 • REV A • 6/17
5. Using the other 1/2" knockout on the back of the cabinet, wire the IntelliPurge
®
Nitrogen Purge Valve to the IntelliGen
™
Controller using 3 wire cable (22 AWG recommended). See the IntelliPurge
®
Section on page 21 for more details. Connect
the PLINK to the terminal blocks next to the controller. See Fig. 11.
Fig. 12
BMS-NO
BMS-NC
BMS-C
Fig. 11
6. Using the same 1/2" knockout on the back of the cabinet, a form C relay is available to wire any BMS (Building Management
System) to the BMS terminal blocks. See Fig. 12.
PL-G
PL-B
PL-A
