Chapter 8 - DVR Control
8
DVR Control
The System X4 PRO has the ability to power on
the Flashback 4 DVR (and Flashback 4G Modem)
independently of the cameras/accessories.
“SET O1 : ## x” Command:
This command will turn on or turn off the OUTPUT1 (Flashback 4 DVR). The
OUTPUT1 will remain on or off until another trigger or SMS command activates it
again. This command will return an O1 SMS.
WARNING:
The “O1” in the “SET O1 : ## x” command
is the letter ‘O’ and the number ‘1’!
WARNING:
If a relay is turned on by a trigger or SMS,
when the relay’s timer reaches zero, the OUTPUT1 will turn off!
Notes:
●
The “SET O1 : ## x” command can be used at any time to set the OUTPUT1
(Flashback 4 DVR) on or off.
●
The OUTPUT1 can be set from 1 second to 90 minutes.
●
ANY TIME ANY OF THE RELAYS/CAMERAS ARE ON, THE OUTPUT1
(FLASHBACK 4 DVR) WILL BE ON.
DocRef#0070602
System X4 PRO - User Guide
Page 21
