Section 4: AS/400, iSeries Host Set Up
4-15
Library . . . . . . . . . . . . : *LIBL
Character identifier . . . . . . . : CHRID *SYSVAL
Remote location . . . . . . . . . : RMTLOCNAME '0.0.0.0'
Local location . . . . . . . . . . : LCLLOCNAME *NETATR Name
Remote network identifier . . . . : RMTNETID *NETATR Name
Mode . . . . . . . . . . . . . . . : MODE QSPWTR Name
Dependent location name . . . . . : DEPLOCNAME *NONE
Text . . . . . . . . . . . . . . . : TEXT M48 AS Net Printer
User-defined options . . . . . . . : USRDFNOPT
-----------------User-defined options------------------
* * * * * E N D O F L I S T I N G * * * * *
4.6.2 V3R7, V4R3 and V4R4
CRTPSFCFG
Command.
The
CRTPSFCFG
command is used to configure AFP for OS/400 V3R7.
Use the following user defined settings to create the AFP description:
A. PSF configuration (
PSFCFG
). Enter a name or description for the IntelliBar AS Net
printer being configured (ex.,
M48ASN
)
. The name must match the
USRDFNOBJ
name
in the printer
CRTDEVPRT DEVD
command.
B. Library. Select
QGPL
.
C. IPDS pass through (
IPDSPASTHR
). Select
*YES
to print SCS files (transforms SCS
into IPDS). Select
*NO
to print only IPDS files.
D. Activate release timer (
ACTRLSTMR
). Select
*NORDYF
. This activates the release timer
when there are no spooled files in the output queue with a Ready Status (
RDY
) after
the last spooled has printed.
*NORDYF
provides that all
RDY
files are printed before
releasing the session.
*NORDYF
does not terminate the writer).
E. Release timer (
RLSTMR
). Enter a value equal to or greater than the TCP/IP
TIMEOUT setting on the IntelliBar print server. IntelliTech recommends
*SEC15
.
This sets the time PSF/400 maintains a session with the IntelliBar when there are no
Ready Status (
RDY
) spooled files.
F. Remote Location name (
RMTLOCNAME
). Enter the IntelliBar AS Net print server IP
address.
G. TCP/IP port (
PORT
). Enter
5001
.
H. TCP/IP activation timer (
ACTTMR
). Enter the number of seconds for PSF/400 to wait
for the IntelliBar printer to respond to an activation request. If the printer will be used
only by one system, use the default value (
170 seconds
). If the printer will be used
by more than one system, select
*NOMAX
.
