Section 4: AS/400, iSeries Host Set Up
4-9
4.4.2 V3R2
CRTPSFCFG
Command.
The
CRTPSFCFG
command is used to configure AFP for OS/400 V3R2.
Use the following user defined settings to create the AFP description:
A. PSF configuration (
PSFCFG
). Enter a name or description for the IntelliBar AS Net
printer being configured (ex.,
M48ASN
)
.
B. Library. Select
QGPL
.
C. IPDS pass through (
IPDSPASTHR
). Select
*YES
to print SCS files (transforms SCS into
IPDS). Select *NO to print only IPDS files.
D. Activate release timer (
ACTRLSTMR
). Select
*NORDYF
. This activates the release timer
when there are no spooled files in the output queue with a Ready Status (
RDY
) after the
last spooled has printed.
*NORDYF
provides that all
RDY
files are printed before releasing
the session.
*NORDYF
does not terminate the writer).
E. Release timer (
RLSTMR
). Enter a value equal to or greater than the TCP/IP TIMEOUT
setting on the IntelliBar print server. IntelliTech recommends
*SEC15
. This sets the time
PSF/400 maintains a session with the IntelliBar when there are no Ready Status (
RDY
)
spooled files.
F. Remote Location name (
RMTLOCNAME
). Enter the IntelliBar AS Net print server IP ad-
dress.
G. TCP/IP port (
PORT
). Enter 5001.
H. TCP/IP activation timer (
ACTTMR
). Enter the number of seconds for PSF/400 to wait for
the IntelliBar printer to respond to an activation request. If the printer will be used only by
one system, use the default value (
170 seconds
). If the printer will be used by more
than one system, select
*NOMAX
.
Configure the V3R2 AFP description by typing the following commands on the command line
and completing the recommended settings:
Note. For the
RMTLOCNAME (‘
0.0.0.0
’)
entry, enter the Intelli-
Bar AS Net print server IP address.
CRTPSFCFG
PSFCFG(M48ASN) IPDSPASTHR(*YES) RLSTMR(*SEC15) TEXT
(<M48 AS Net Printer>) RMTLOCNAME (‘0.0.0.0’) PORT(5001)
