Intellian T240CK, Инструкция по установке и эксплуатации

Страница: 77 / 160

77
OPERATING THE ACU
Installation Settings
During the first time installation, it is required to setup the installation settings.
Installation
menu
Latitude & Longitude
Gyro type
Select satellite
Setup mode
S E T U P M O D E ?
Y E S N O
1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP mode
+ A N T E N N A + S A T E L L I T E
+ S Y S T E M + I N S T A L L A T I O N
2. Press arrow keys to move cursor to INSTALLATION menu and press OK key to enter it.
S E L E C T S A T E L L I T E
[ 1 ] K U A S I A 6 A H 1 2 5 . 0 E
3. Press UP and DOWN arrow keys to select the satellite that you wish to track and press OK
key to load the selected satellite.
L A T I T U D E L O N G I T U D E
3 7 . 0 0 N 1 2 6 . 5 3 E
4. Set the current LATITUDE and LONGITUDE
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value. Or press NUMBER keys
to set the desired value directly. Press OK key to set the parameter.
G Y R O T Y P E B O W A D J U S T
N M E A 0 0 0
5. Set the ship’s GYRO TYPE* and BOW ADJUST
A search pattern 1 or 3 will be initiated according to which Gyro Type is selected and
the existence of the gyro input. Ensure that the supported Gyro Type is set correctly.
For t240CK, if the ship’s gyrocompass output is Step-by-Step (SBS) or Synchro,
separate purchase of a gyro converter is required.