Intellian t110W, Инструкция по установке и эксплуатации

Страница: 83 / 98

83
PC CONTROLLER SOFTWARE
Antenna Status
• Search 2:
The search range corresponds to the Search Pattern 2. Once
the signal is located, the antenna will enter into Search 3 mode
• Search 3:
The antenna is detecting the satellite signal which is above the
current tracking level threshold. The search range corresponds to search
Pattern 3. Once the signal is located, the antenna will enter Tracking mode.
• Tracking:
Antenna is tracking the selected satellite.
• Initialize:
Antenna or the ACU is initializing.
• Unwrap:
Antenna is unwinding/ winding the cable in the antenna.
• Setup:
Antenna is in setup mode.
• Comm:
Antenna is able to be communicated.
Command Buttons
• Restart:
To exit setup mode and restart the antenna again.
• Setup:
To enter setup mode.
• Get Antenna Information:
To indicate the information on display after receiv-
ing input from the antenna.
• Factory Setting:
To initialize all antenna information to default as it
• was in the factory status.
• Save Satellite:
If the current settings are able to locate the satellite
(in Tracking mode), press this button to save the settings. It will shorten the
satellite acquisition duration next time
• Load and Update Default:
To select the regional library file on the
PC program and update the antenna by using the selected library file.
See below for detailed instructions;
1. Click the “Load Default” button to select a regional library file *.rif
according to your region.
Figure 32. Load Regional Library