Intellian t110W, Инструкция по установке и эксплуатации

Страница: 53 / 98

53
OPERATING THE ACU
6. Set the SCAN OFFSET. (Range : 0 -90)
THe scan offset is to offset the angle difference between the black marker on the
sub-reflector and the optical sensor.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new
SCAN OFFSET.
7. Set the DISEQC THRES. (Range : 0 - 1000)
The DiSEqC thres is to set the DiSEqC signal threshold level.
Press the LEFT and RIGHT arrow keys until the desired character to be edited is
underscored (selected) and press the UP and DOWN arrow keys to increase and
decrease the selected character. Or press the NUMBER keys to set the desired
value directly. Press the OK key to set the new
DISEQC THRES.
8. Set the DETECT LEVEL. (Range : 1-200)
The detect lelvel is to set the satellite signal detection level.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the new
DETEC LEVEL.
Or press the RETURN key to return to the main display.
S C A N O F F S E T D I S E Q C T H R E S
5 5 1 0 0
S C A N O F F S E T D I S E Q C T H R E S
5 5 1 0 0
D E T E C T L E V E L T R A C K I N G L E V E L
0 6 0 0 3 0