Intellian MIM, Инструкция по установке и эксплуатации

Страница: 8 / 21

8
Intellian MIM - Installation and Operation User Guide
Dual Tuner Receiver Installation Instructions
1. Connect the RF cable from any “TO RECEIVER SATELLITE IN” on the
rear of the MIM to the “Satellite 1” on the rear panel of the receiver.
2. Connect the RF cable from any “TO RECEIVER SATELLITE IN” on the
rear of the MIM to the “Satellite 2” on the rear panel of the receiver.
Note: Each tuner requires a separate coax to the MIM. Do not use the
DISH Network Dish Pro Plus DPP Separator P/N: 123254
The video output from the dual tuner receiver changes between tuner A
and tuner B when powered up. You may need to press the button on the
front panel of the MIM to change the “Master” status after the receiver
has been restarted.
Multi-Receivers (up to 4) Installation
1. Connect the RF cable from the “RF1” connector on the antenna to the
“ANT.RF” connector on the rear panel of the Antenna Control Unit (ACU).
2. Connect the RF cable from the “RECEIVER” connector on the rear
panel of the ACU to the “RF INPUT-RF1” connector on the MIM.
3. Connect the RF cable from the “RF2” connector on the antenna to the
“RF INPUT-RF2” connector on the MIM.
4. Connect with the RS-232C cable from the “PC Interface” connector
on the rear panel of ACU to the “ACU-RS-232C” connector on the
MIM.
5. Connect the RF cable from any “TO RECEIVER SATELLITE IN” on the
rear of MIM to the “Satellite In” on the rear panel of the receiver.
6. If you have more than one receiver, repeat step 5 to connect RF
cables between the other receivers and the MIM connectors.
7. After completing connections, select one as “Master” by pushing
the button on the front panel of the MIM (Refer to Page 12).