Intelix DIGI-HD-8X8, Руководство по установке

Страница: 18 / 27

Intelix
DIGI-HD-8X8
Installation Manual
18 www.intelix.com
Where AAh is the first character of the Password entry. AA should be sent as
the hex representation of the ascii character. Where BBh is the second character
of the Password entry. BB should be sent as the hex representation of the ascii
character. Where CCh is the third character of the Password entry. CC should
be sent as the hex representation of the ascii character. Where DDh is the fourth
character of the Password entry. DD should be sent as the hex representation of
the ascii character.
<Reply> Admin Lock Status Report (Class 0 ID 7)
<Notes> Password must be 4 characters in length. Access to any edits in
configuration must be done with the admin lock status unlocked.
Get Admin Lock Status (ID 6)
<Description> This command is sent to the matrix to check the current Admin
lock status.
<Example> F1h 02h 00h 06h
<Reply> Admin Lock Status Report (Class 0 ID 7)
<Notes> None
Admin Lock Status Report (ID 7)
<Description> This commmand is sent by the matrix to report the current
Admin lock status.
<Example> F1h 03h 00h 07h AAh
Where AAh is the admin lock status bit. Valid responses include 00 for Locked
and 01 for Unlocked.
<Reply> None
<Notes> None
Set Unlock Password (ID 8)
<Description> This command is sent to the matrix to change the User
password.
<Example> F1h 06h 00h 08h AAh BBh CCh DDh
Where AAh is the first character of the Password entry. AA should be sent as
the hex representation of the ascii character. Where BBh is the second character
of the Password entry. BB should be sent as the hex representation of the ascii
character. Where CCh is the third character of the Password entry. CC should
be sent as the hex representation of the ascii character. Where DDh is the fourth
character of the Password entry. DD should be sent as the hex representation of
the ascii character.
<Reply> Set Unlock Password Report (Class 0 ID 9)
<Notes> Password must be 4 characters in length. Admin Lock Status must be
Unlocked or Password change will fail.
Set Unlock Password Report (ID 9)
<Description> This command is sent by the matrix to inform external software /
controllers if the Set Unlock Password command was successful.
<Example> F1h 03h 00h 09h AAh
Where AAh is the success status bit. Valid responses include 00 for Success
and 01 for Fail.
<Reply> None
<Notes> None
Set Admin Password (ID 10)
<Description> This command is sent to the matrix to change the Admin
password.
<Example> F1h 06h 00h 0Ah AAh BBh CCh DDh