Intelix
DIGI-HD-4X2
Installation Manual
8 www.intelix.com
DIP 1
DIP 2
DIP 3 EDID Function
off off off
Dual Twisted Pair Mix Mode
The matrix mixes the EDID data of all destinations
which choosing the same source. This data is then
transmitted by the matrix to the source device. To
copy and sync the EDID data, simultaneously press
and hold the
Output 1
button and
Keylock
button
for 3 seconds.
off off on
EDID Copy Mode
EDID data is copied from the selected output and
transmitted to the desired input. To copy and sync
the EDID data, press and hold the output button of
the selected output for 3 seconds.
off on off
Factory Default: 1080p with stereo audio
The matrix is preset with EDID data for 1080p
video and stereo audio.
off on on
Factory Default: 1080i with stereo audio
The matrix is preset with EDID data for 1080i video
and stereo audio.
on off off
Factory Default: 1080p with 5.1 audio
The matrix is preset with EDID data for 1080p
video and 5.1 audio.
on off on
Factory Default: 1080p with 7.1 audio
The matrix is preset with EDID data for 1080p
video and 7.1 audio.
Note:
The DIGI-HD-4X2 features on-board memory. Settings are
stored during power off and restored during power on.
Signal Mode Settings: HDsh
ā
k Inside
The DIGI-HD-4X2 features HDsh
ā
k processing, which is activated and
toggled through the signal mode DIP switches on the rear of the unit.
To change the signal mode:
1.
Power off the DIGI-HD-4X2.
2.
Set the DIP switches to the desired setting.
3.
Power on the DIGI-HD-4X2.
