Intelbras IVP 7001 MW PET, Руководство пользователя

Страница: 8 / 13

8
2. Remove the card to perform the installation:
Gire o parafuso
no sentido
anti-horário
Deslize a placa
para cima
para removê-la
Turn the screw
counterclockwise
Slide the card up
to remove it
3. For installation directly or in a wall corner, break the seals indicated for the holes in the rear attaching cover:
Lacres para
instalação
em parede
Lacres para
instalação
em quina
Seal for wall
installation
Seal for corner
installation
4. Installation without using the articulator:
Attention:
if the mounting bracket is inclined with respect to the ground, the characteristics of the PET
function
will change. This support only has horizontal movement, and vertical movement is not possible.
» With the help of a wrench, break the screw passage seal located on the rear cover and connect the articulator parts
and the screw on the rear of the cabinet, as shown below:
Obs.: As setas indicativas
nas peças devem ficar para cima
conforme imagem.
Note: the indicative arrows on the parts must
be upwards as shown in the images.