Intelbras IVP 3000 PET, Руководство пользователя

Страница: 9 / 13

9
3. Separate the moving part from the base of the articulator;
Parte móvel Base do articulador
Moving part Articulator base
4. For installation directly on the wall, drill the holes in the positions indicated on the base of the articulator. For installation
in the corner of the wall, drill the holes in the positions indicated on the side of the back cover;
Montado na
parede
Montado
no canto da
parede
Mounted on
the corner of
the wall
Wall mounted
5. Pass the cable through the holes indicated on the articulator;
6. Attach the movable part of the articulator to the rear sensor cover, attaching the hex nut;
7. Snap the board back into the back cover and connect the cables to the terminal block, as indicated in the item
2.3. Terminal Block;
8. Align the screw that secures the board with the arrow indicated on the board and tighten the screw.