Intelbras IVP 3000 PET, Руководство пользователя

Страница: 10 / 13

10
9. Fit the movable part of the articulator to the base, pressing down;
10. Make sure the back cover of the detector is parallel to the wall and then attach the articulator.
5. Operation
The LED jumper is used to control the LED indication without interfering with the detector. With the jumper closed ON, LED
on. With the jumper open, LED off.
Factory default: LED on.
The Pulse
jumper controls the pulse count to activate the alarm. With the jumper in position 1P the sensor provides maxi-
mum sensitivity (1P one pulse). With the jumper in the 2P position the sensor provides detection suitable for environments
with high incidence of EMI and RFI interference (2P two pulses).
Factory default:
jumper in position 2P.
The Relay jumper controls the state of the relay contact. With the jumper in the NC position, the contact is normally closed.
With the jumper in the
NO position, the contact is normally open.
Factory default: NC.