Intelbras IVP 3000 PET, Руководство пользователя

Страница: 7 / 13

7
4. Installation
The IVP 3000 PET sensor has the
PET function. This function allows the sensor to be immune to false triggering caused by
small animals and this sensor model is immune to false triggering caused by crawling animals up to 35 kg.
Note: it is important to emphasize that the PET function is designed for crawling animals, so if the animal is not on the ground,
such as on a bench, for example, the animal can be detected thus annulling the PET function, as can be seen in the image below.
Installation
Before starting the installation, it is necessary to define the sensor installation height, which can vary from 2.1 to 2.2 m,
installation below 2.1 m will compromise the sensor’s
PET function.
4.1. Installation without using the articulator
1. Open the sensor through the lock at the bottom;
TRAVA
Lock
2. Loosen the screw that holds the board and slide the board down to remove it;
Note: it is not necessary to remove the screw.
Pa
ra
fuso
3. Tear the seal at the top of the back cover for cable passage;
LACRE LACRE
Seal Seal