Intel WM3B2100, Руководство пользователя

Страница: 13 / 45

1. Insert the Intel CD into your CD-ROM drive. The Intel(R) PRO Network Connections
screen displays. (If it doesn't display, use Start, Run and launch the file autorun.exe
from the Intel CD.)
2. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters .
3. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin
Tools .
4. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration
Tools screen, click Next .
5. On the License Agreement screen, after reading the license agreement, select I
accept the terms in the license agreement and click Next .
6. On the Setup Type screen, verify that Typical is selected, then click Next .
7. On the Ready to Install the Program screen click Install .
8. After the software is installed on your computer, click Finish . Click Exit to close the
Intel(R) PRO Network Connections screen.
9. To launch the Wireless Administration Tools, follow the path Start > Programs >
Intel(R) PRO Wireless > Access Point Administration Tools and select AP
Discovery or Site Survey . For additional information on either program, press F1 or
click Help while the program is running.
-Installation under Windows Me
Preliminary Notes
The installation instructions in this section are based on the following assumptions:
•
The wireless adapter hardware has already been installed in the computer in
accordance with the computer manufacturer's instructions.
•
The computer has not been powered on since the hardware installation was completed.
•
No other wireless LAN card is installed in this computer.
To install the driver before installing hardware, use Start > Run and browse to the file
SetupWLD.exe in the path PROW7100\WINSE-ME on the Intel CD. After running
SetupWLD.exe, shut down the computer and install the hardware. When the computer restarts,
the driver will be automatically installed.
Driver Installation
To install the software in Windows* Me (Millennium Edition), follow these steps:
1.
Power up the computer in which the wireless adapter hardware has just been installed.
2. Wait for Windows to detect the newly installed hardware and display the Add New
Hardware Wizard dialog. DO NOT click Next . Verify that Automatic search for a
better driver (Recommended) is selected. If Windows does not detect the new
hardware, see Troubleshooting .