manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Справочное руководство, Страница: 82 / 125

Поделиться
Скачать
Intel True Scale Fabric 12000 Series Скачать руководство пользователя страница 82

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

82

0:0x00066a00e3002711|DETAIL:transition from DISCOVERING to MASTER

Local LID changed to: 1

Local LID changed to: 1

topology_loopTest: DONE

W|2011/09/15 14:19:28.390U: Thread "esm_top" (0xcca0d828)

        MSG:WARNING|SM:Intel 12200 GUID=0x00066a00e30027xx:port 0|COND:#1 

Redundancy lost|NODE:Intel 12200 GUID=0x00066a00e3002711:port 

0:0x00066a00e3002711|DETAIL:SM redundancy not available

topology_loopTest: DONE

..................done

The SM Loop Test is being started in Fast Mode

Notes

Use this command to start the SM Loop Test in Fast Mode with the specified number of 

256-byte packets. Valid values for the number of packets are 0-to-10. The default is 

four (that is, if the command is executed without any stated packets, it will start up and 

inject 4 packets). If the number of packets is 0, then no packets will be injected. If the 

SM has not been previously started, this command will start the SM. Note that the Loop 

Test will only function if the SM is in the Master state.

2.5.5.57

smLooptestStop

Stops the SM Loop Test.

Syntax

smLooptestStop

Options

None.

Sample Output

-> XEdge-> smLooptestStop

Waiting for SM to complete shutdownA|2011/09/15 14:21:46.500U: Thread "esm_Start" 

(0x85738dd8)

        ESM: SM Control: Initiating shutdown of the subnet manager. Some errors and 

warnings are common during this process 0

N|2011/09/15 14:21:46.500U: Thread "esm_Start" (0x85738dd8)

        MSG:NOTICE|SM:Intel 12200 GUID=0x00066a00e3002711:port 0|COND:#7 SM 

shutdown|NODE:Intel 12200 GUID=0x00066a00e3002711:port 0:0x00066a00e3002711

........N|2011/09/15 14:21:54.720U: Thread "INVALID" (0xcca13ac8)

        MSG:NOTICE|SM:Intel 12200 GUID=0x00066a00e3002711:port 0|COND:#13 SM state 

to inactive|NODE:Intel 12200 GUID=0x00066a00e3002711:port 

0:0x00066a00e3002711|DETAIL:transition from MASTER to NOTACTIVE

...A|2011/09/15 14:21:57.720U: Thread "esm_Start" (0x85738dd8)

        ESM: SM Control: Subnet manager shutdown complete. 0

...................done

The SM Loop Test is being stopped

Содержание True Scale Fabric 12000 Series






























































































































Отзывы:

Нет отзывов