Intel True Scale Fabric 12000 Series Скачать руководство пользователя

Страница: 49 / 125

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

12000 Series CLI

File Directory:[PATH TO FIRMWARE FILE]

File name:[xxxx.pkg]

Notes

Firmware update works by using ftp to retrieve the firmware file, then writes the file to

flash. Omitting any of the options causes the user to be prompted for the information.

2.5.4.3

fwUpdateChassis

Updates the firmware for all cards in a chassis of a particular type, or everything.

Syntax

fwUpdateChassis (all,management,evic, fvic) [noprompt] [reboot]

Options

(all,management,evic, fvic)

–

Type of card to update. See notes for details.

noprompt

–

Will not prompt the user for ftp information (uses the saved values).

reboot

–

Upon successful completion, reboots the updated cards .

Sample Output

-> fwUpdateChassis all reboot

Notes

Firmware update works by retrieving the firmware file from an ftp server. The file is

saved locally and then written to flash. Using the ’all’ option, all cards in the chassis will

be updated. This assumes that all firmware files are in the same location. The user will

be prompted for the names of each file for each line card type present. The system can

save the values entered as defaults for future firmware updates.

2.5.4.4

fwListFiles

Lists the contents of the firmware directory.

Syntax

fwListFiles

Options

None.

Sample Output

-> fwListFiles

Listing Directory /firmware:

[PATH TO FIRMWARE FILE] / [FIRMWARE FILE NAME]

Notes

The firmware directory temporarily stores firmware files before they are written to

flash.

Содержание True Scale Fabric 12000 Series






























































































































Результаты поиска

Содержание True Scale Fabric 12000 Series

Отзывы:

Похожие инструкции для True Scale Fabric 12000 Series

Бренды по названию

Популярные бренды

Intel True Scale Fabric 12000 Series, Справочное руководство

Результаты поиска

Содержание True Scale Fabric 12000 Series

Отзывы:

Похожие инструкции для True Scale Fabric 12000 Series

Бренды по названию

Популярные бренды